Close icon Close icon

BOREMAC Self-boring Pressuremeter

SELF-BORING PRESSUREMETER

COMPATIBLE WITH TEXAM CONTROL UNIT

RUGGED CONSTRUCTION

The BOREMAC is a self-boring pressuremeter used to determine strength and stress-strain properties of fine soils and sand.

Description

The self-boring pressuremeter system is used for the in situ measurement of mechanical properties of fine soils and sands. It utilizes a standard N size monocellular TEXAM probe which bores its way into place through fine soils.

The BOREMAC is comprised of:

Desintegrator module

This module is at the base of the probe and consists of a cutting shoe and a cutting tool. The position of the cutting tool is adjustable with respect to the leading edge of the shoe.

Probe module

A standard N-size TEXAM monocellular probe with modified outer metallic rings and jam nuts.

Probe-to-outer-rod adapter

This adapter is used to link the probe with the outer rod string and contains 4 large openings to allow the return of the drilling fluid and cuttings to the surface.

The tubing

A high-pressure single conduit fitted with a shut-off quick connect to keep the probe and tubing saturated.

Test Procedure:

A drill rig must be used for providing the insertion force required to push the probe into place, for providing the hydraulic force driving the cutting tools, and for injecting drilling fluid. As material enters the cutting shoe, it is broken up by the cutter and brought up to the surface with the drilling fluid in the annular space formed by the outer rod and the borehole walls. When the probe reaches the test depth, the self-boring operation is stopped and the pressuremeter test is carried out, after which the descent of the probe is resumed. Lengths of inner and outer rods are added as needed. Should a layer of gravel have to be traversed or tested, conventional drilling techniques are used to advance the hole. The test can be carried out using self-boring probe assembly in the pre-drilled hole.

Specifications

Probe

 

Diameter (deflated)

73 mm

Overall length  

180 cm

Maximum working pressure

4000 kPa in the self-boring mode

Weight

17 kg

Rods

 
Outer rods OD 46 mm (1 13/16’’)
Outer rods ID 38 mm (1 1/2’’)
Inner rods OD 12.6 mm (1/2’’)
Inner rods ID 6.3 mm (1/4’’)
Maximum driving force 4 tons

Cutting Tool Requirements

 
Supply requirements for the hydraulic motor: 19 l/m (5 gpm) at 17500 kPa 
Cutter rotation: 50 to 200 rpm
Drilling fluid requirements : 2 to 5 gpm at 700 kPa (water or drilling mud) 
Ordering Info

Please specify:

  • Tubing length

Accessories:

  • Rods-to-drill-rig adapter
Down arrow
close

Search Roctest

Searching...